XH series LED color and Easy wiring Unit

LED illuminated color variations Monocolor, Dual-color

Single, Dual color illuminating image (Simultaneously lighting Two LEDs)

　　Bule(14) 　　　　Super Green & Blue(1814)　　　Red & Bule(7014)　　　Red(70)

 

　　Super Green(18) 　 　　Green(80)　　　 　 Yellow & White(9016) 　　　　Yellow(90)

 

　　White(16)　　　White & Super Green(1618) 　Bule & White(1416)　 Red & Super Green（7018)

LED illuminated 4-Split Face

Click an image to see lighting ON, and double click to see lighting OFF.

　Bule(14) Yellow(90) 　　　　Green(80) & Red(70)　　 ALL LED illuminated

LED illuminated 3-Split Face

Click an image to see lighting ON, and double click to see lighting OFF.

　Bule(14) lower left　　　 Super Green(18) upper part　　 ALL LED illuminated

LED illuminated Split Face

Click an image to see lighting ON, and double click to see lighting OFF.

　Red(70) lower part 　　　　Yellow(90) & Red(70)　　 ALL LED illuminated

　Horizontal Split-Face 　 　Horizontal Split-Face　　　Vertital Split-Face

Easy Wiring Unit for XH series

Simple wiring. No electric power, No soldering required. Simplly insert the welding wire into the socket.
No need to remove the wire sheath. No produce waste of the wire sheath.
No soldering required. Use parallel pliers to wire the solderless terminal.

For more information, please refer to the manual.

PDF DATA AVAILABLE FROM HERE.

Dimensions

Terminal cover unit
XH-4633
Terminal crimping holder (Single)	NC, NO, L1～L4
PA-4634
Terminal crimping holder (Double)	COM, LC
PA-4635

Standard applecable wire

UL1007、UL1430　AWG＃22、20（0.3～0.5sq）
Outside diameter of the outer insulation : Φ1.4～2.0

Specifications

Characteristic	Specification	Conditions
Insertion-extraction durability	Contact resistance 50mΩ max.	20 times
Vibration	Contact resistance 50mΩ max. No electrical discontinuity of 0.1ms max.	Frequency 10-55Hz, Amplitude modulation 1.5mm, Cycle 3-5 min, XYZ axis direction, each 2 hours
Shock		Sine harf wave 50G, Pulse duration 11ms, XYZ axis direction, each 3 times
Contact Resistance	Less than 50mΩ(Initial) at DC 6V 1A
Insulation Resistance	More than 100mΩ at 500V DC
Dielectric strength	1000V AC RMS between NC and NO terminal 2000V AC RMS between terminals and ground 50/60Hz for 60 sec. at normal ambient temperature and humidity
Retension force	30N(AWG22) 40N(AWG20) (Vertical direction) between terminal crimping hohlder and terminal cover unit
Fitting strength	25N (Vertical direction) between terminal cover unit and XH series Housing
Applicable wire	UL1007、UL1430　AWG＃22、20（0.3～0.5sq) Outside diameter of the outer insulation : Φ1.4～2.0
Ambient Temperature	－15～＋50℃
Ambient Humidity	80％RH（max.)
Electrical Rating	AC 250V 3A, DC 30V 1A (Resistive)

Ordering Code

Selling as a set in case of XH contact is SPDT and Full-Face illumination type.
XH-4636-1		Terminal cover unit 1 pcs
		Terminl crimping holder (Single) 3 pcs
		Terminal crimping holder (Double) 2 pcs
Selling Separately for Large amount, maintenance.
XH-4633		Terminal cover unit 1pack of 10 pcs
PA-4634		Terminal crimping holder (Single) 1pack of 50 pcs
PA-4635		Terminal crimping holder (Double) 1pack of 50 pcs